The exchange of aquarium air pump with speed control board for the exchange of oxygen-increasing single-pump and double pump speed. Smoothing the output voltage can be adjusted to meet the requirements of different aerobic.
Input voltage: AC220V 50HZ OR AC110V 60HZ
Output voltage: AC80V-AC210V, the scope can be adjusted to customer requests.
Power load: <50W
EIO's DC Delay touch switch is especially suited for the load as follows: motor, energy-saving lamps, fluorescent lamps (fluorescent tubes), LED lights and incandescent lighting sources, such as the use of conventional lighting.
Applications: household electrical appliances.
Features: The single-chip microcomputer (MCU) to control, delay and high precision, the work of the state of clarity, the length of time the button press has nothing to do with the delay time, even if users do not hold down the switch has been turned on. Delay the work of a button and then re-delay, the indicator light flashes quickly.
Delay time: 60 seconds ± 1 seconds (according to user requirements change for 1 second to 24 hours)
EIO'S two-500W Dimmer
The scope of application: dimming, the governor.
Power: 500W
Voltage: AC220V @ 50HZ
Adjustment range: AC20V-215V OR AC50V-215V
can be customized or 110V60HZ
EIO'S 300W switching governor
The scope of application: ceiling fan, fan speed control.
Power: MAX-300W
Voltage: AC220V @ 50HZ
Adjustment range: AC50V-215V
can be customized or 110V60HZ dimmers and the governor
EIO'S double-standard switch-touch switch delay is particularly well suited to load: energy-saving lamps, fluorescent lamps (lights), LED lamps and incandescent light sources, such as lighting, such as the use of conventional lighting sources.
Application: for the corridor, corridors, bathrooms, toilets and other public places of use, point and click to start, delay the closure to the use of energy saving and environmental protection effect.
Features: The single-chip (MCU) control, high-precision delay, the work of the state of clear, press the button on the length of time has nothing to do with the delay, even if the user was holding down the switch would not have been open. Delay in the work of a button and then re-delay, the indicator light flashes quickly.
Installation: the line of fire (L), zero line (N), load (A) three-line connection
Power: <500W incandescent or <150W energy-saving fluorescent lamps
Voltage: 220V
Delay Time: 60 seconds ± 1 seconds
